StructuralCurveMemberRib Properties |
[This is preliminary documentation and is subject to change.]
The StructuralCurveMemberRib type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Alignment |
Determines the position of the system-lines on the cross-section of the rib.
|
| Behaviour |
The behaviour of this rib in the Structural Analysis model
|
| BucklingLength |
Buckling length for individual directions may be specified on each rib
|
 | Color |
The color of the object.
Primarily used when exporting to BIM+
|
| CrossSection |
The StructuralCrossSection out of which the rib is constructed
|
| Curves |
The CurveTCoordinate's out of which the member exists
|
| EccentricityEz |
Eccentricity Z of the system line
|
| EffectiveWidth |
Determines the method which is considered for specifying the effective width.
|
| Id |
The ID of the Analysis object.
Needs to be unique within the entire model
(Inherited from StructuralAnalysisObjectBase.) |
| InternalNodes |
Contains the nodes connected to this rib but are not part of the geometry
|
| Layer |
Custom created layer name. Used to group entities together
|
| Length |
The length (from start to end) of the member.
The application providing the ModelExchanger.AnalysisDataModel should calculate this field.
|
| Member2D |
The StructuralSurfaceMember on which the rib is placed
|
| Name |
The name of the Analysis object.
Needs to be unique within it's type
(Inherited from StructuralAnalysisObjectBase.) |
| ParentId |
The ID of the parent object of the same type
|
| Position |
Determines the shape of the effective width of the rib
|
| Results |
1D Analysis results.
|
| TypeOfConnection |
Determines the degree of shear connection between the rib and the plate
|
| WidthLeftForCheck |
Effective width on the left side.
Used for check.
This property is unit-less.
|
| WidthLeftForCheckLength |
Effective width on the left side.
Used for check.
|
| WidthLeftForForces |
Effective width on the left side.
Used to calculate internal forces.
This property is unit-less.
|
| WidthLeftForForcesLength |
Effective width on the left side.
Used to calculate internal forces.
|
| WidthRightForCheck |
Effective width on the right side.
Used for check.
This property is unit-less.
|
| WidthRightForCheckLength |
Effective width on the right side.
Used for check.
|
| WidthRightForForces |
Effective width on the right side.
Used to calculate internal forces.
This property is unit-less.
|
| WidthRightForForcesLength |
Effective width on the right side.
Used for check.
|
See Also