PointStructuralReferenceOnBeam Properties |
[This is preliminary documentation and is subject to change.]
The PointStructuralReferenceOnBeam type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AbsoluteDeltaX |
Defines the distance between forces acting on the 1D member when CoordinateDefinition is Absolute
|
| AbsolutePositionX |
Defines the position of the load on the 1D member in local coordinate system when CoordinateDefinition is Absolute
|
| CoordinateDefinition |
Specifies the definition of the position. It may be absolute or relative
|
| Extent |
The extent of force on the beam. (Only applicable for moment point loads)
|
| Origin |
Specifies where the origin for the position co-ordinate measurement is
|
| ReferenceMember |
The StructuralCurveMember on which the point load acts
|
| RelativeDeltaX |
Defines the distance between forces acting on the 1D member when CoordinateDefinition is Relative
|
| RelativePositionX |
Defines the position of the load on the 1D member in local coordinate system when CoordinateDefinition is Relative
|
| Repeat |
Defines the number of forces acting on the beam. If the number is greater than 1, the forces are distributed uniformly over the 1D member
|
See Also