RelConnectsSurfaceEdge Properties |
[This is preliminary documentation and is subject to change.]
The RelConnectsSurfaceEdge type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | CoordinateDefinition |
Specifies the coordinate system that is used to define the length.
|
| Edge |
The 0-based index of the edge of the Edges on which the hinge is connected
|
| EndPointAbsolute |
Defines the position of the end point in absolute coordinates
|
| EndPointRelative |
Defines the position of the end point in relative coordinates
|
| Id |
The ID of the Analysis object.
Needs to be unique within the entire model
(Inherited from StructuralAnalysisObjectBase.) |
| Member2D |
The StructuralSurfaceMember on which the hinge is connected
|
| Name |
The name of the Analysis object.
Needs to be unique within it's type
(Inherited from StructuralAnalysisObjectBase.) |
| Origin |
Specifies the origin of the coordinate system used for the definition of the length
|
| ParentId |
The ID of the parent object of the same type
|
| RotationX |
Rotational stiffness & the flexibility in rotation of the connection around local X axis
|
| RotationY |
Rotational stiffness & the flexibility in rotation of the connection around local Y axis
|
| RotationZ |
Rotational stiffness & the flexibility in rotation of the connection around local Z axis
|
| StartPointAbsolute |
Defines the position of the start point in absolute coordinates
|
| StartPointRelative |
Defines the position of the start point in relative coordinates
|
| TranslationX |
Translation & flexibility of the connection in the X direction;
|
| TranslationY |
Translation & flexibility of the connection in the Y direction;
|
| TranslationZ |
Translation & flexibility of the connection in the Z direction;
|
See Also