ModelExchanger.AnalysisDataModel.Enums Namespace

Defines the available directions in which a linear force can act

Defines the available types of load

Defines the available types of load in general

Enum that controls the import of an AnalysisModel

Defines the type of result

Supported basic predefined types of supports

Supported constraints of a support. The way the support acts in individual directions

Supported coordinate definitions

Supported types of coordinate systems

Define type of profile library

Supported positions of the system-line in cross sections

Supported behaviors of a 1D member in the Structural Analysis model

Defines the available types of distribution of a load on a 1D member

Defines the available type of elements on which a curve force can act

Supported shapes of curves

Supported types methods to define a local coordinate system of a curve

Supported decriptions of cross-sections

Defines the available load impact durations for static standard loads

Defines how a load is extended

Supported form codes (unique shapes) of a cross-section

Supported Global Coordinate System types

This enum serves to indicate if hinges should be applied to rigid link and if so, than on which node

Types groups that can be excluded from deletion during update in Scia engineer

Types that can be excluded from deletion during update in Scia engineer see http://dev.aef.guide/

Defines the available types of variable load

Defines the available load combination categories

Defines the available load combination standards

Defines the available types of StructuralLoadCombinations

Define type of load case

Defines the available load group types

Supported local coordinate system types

Defines the supported types of location of a load

Supported material types

Supported types of 1D member

Supported 2D member alignments of the system plane

Supported 2D member behavior's

Supported 2D member local coordinate system types

Supported 2D member shapes

Supported 2D member types

Defines the available directions for moment loads

Supported national codes

Supported positioning origins

Defines the available type of point forces

Supported hinge positions

Supported shapes of parametric & compound cross-section's

Defines the available types of relations between load cases in a load group

Supported alignments of a rib

Supported shapes of a rib's effective width

Supported methods for specifying a rib's effective width

Defines the available type of connections for StructuralEdgeConnection objects

The available kinds of load distribution

Defines the available types of SurfaceActionDistribution

Supported thickness types for surfaces

Supported unit types

Defines the available types of temperature variations

Supported degrees of shear connections between a rib and a plate

Supported validation states

Defines the available validity types